X09-F
TvnSeal Engineering Plastics Technology Co., Ltd. is a national high-tech enterprise specializing in the R&D and manufacturing of high-performance sealing materials and special polymer new materials.
O-ring preloaded low-friction PTFE rotary seals. They are mainly used for working conditions with alternating pressure on both sealing sides, such as hose reel rotary joints, slewing bearing raceways and machine tool hydraulic systems. Excellent chemical resistance and heat resistance can be achieved by selecting suitable O-ring materials.
| Surface Roughness | Rtmax | Ra |
| Sliding Surface | ≤ 2μm | ≤ 0.05-0.3μm |
| Groove Bottom | ≤ 6.3μm | ≤ 1.6μm |
| Groove End Face | ≤ 15μm | ≤ 3μm |
| Additional Notes: Support Rate: 50-95%, Cutting Depth 0.5R (based on the reference condition of Cref=0%) | ||
| Recommended Dimensions (mm) | Maximum Radial Extrusion Gap | ||||||
| d | D | G | Rmax | S* | |||
| f8 | H9 | +0.2 | 100 bar | 200 bar | 350 bar | ||
| Range (mm) | |||||||
| 5 | 19 | d+4.9 | 2.2 | 0.3 | 0.15 | 0.1 | 0.1 |
| 19 | 38 | d+7.5 | 3.2 | 0.5 | 0.2 | 0.15 | 0.1 |
| 38 | 200 | d+11 | 4.2 | 0.7 | 0.25 | 0.2 | 0.1 |
| 200 | 300 | d+15.5 | 6.3 | 0.7 | 0.3 | 0.25 | 0.1 |
| 300 | 650 | d+21 | 8.1 | 0.7 | 0.3 | 0.25 | 0.15 |
| 650 | 1000 | d+28 | 9.5 | 0.7 | 0.75 | 0.3 | 0.2 |
| 1000 | 3200 | d+38 | 13.8 | 0.7 | 1 | 0.55 | 0.2 |
| The extrusion clearance values shown above are valid at 80°C; smaller clearance values shall be adopted if the operating temperature is higher. | |||||||
Applications
Chemical Industry
Used in pumps, valves, and piping systems for chemical processing plants.
Pharmaceutical
FDA-compliant seals for drug manufacturing and processing equipment.
Food Processing
Sealing solutions for food and beverage processing machinery.
Oil & Gas
High-pressure seals for oil drilling and refining equipment.
Automotive
Engine and transmission seals for automotive applications.
Aerospace
Precision seals for aerospace and aviation equipment.